No matter what the phone is used for, it can be very frustrating if it stops charging or is partially charged. There could be multiple causes of charging problems. In this article, we'll focus on why iPhones sometimes don't charge properly . For all you know this is probably a small and easily correctable problem. Just go through the troubleshooting section and try to fix the problem if it's listed. Some may suggest you replace the battery, but don't jump on the idea. It's the iPhone's software, not the hardware that decides when to charge the phone. If you still think the problem is hardware related, it could also be the charging port, not the iPhone's battery. All iPhone users know that iPhone hardware is the best. In this post, we'll list possible issues that can cause problems with charging.
1. Clean the Lightning port
The Lightning is an 8-pin connector and is designed to ensure you don't easily damage the ports and cable connections that are too indestructible. The downside to the design, however, is that it invites lint and debris to build up, especially if you're used to Latest Mailing Database regularly carrying your phone in your pocket or handbag. Sometimes, even if the port has accumulated a lot of dirt, plugging it multiple times solves the problem and the phone starts charging. However, doing so allows lint and other particles to stick to the connector. As a result, the unplugging technique also stopped working because the cables couldn't connect to the iPhone due to the accumulation of dust. So, your next step should be to inspect the port and clean it thoroughly.
Image source: cnn.com
To clean dirt from the charging port, it's good to use a brand new and very soft toothbrush, as they are anti-static and non-conductive . With a soft anti-static brush, you can be sure it won't charge or damage your iPhone's electronics. Or, if you'd like to lighten your pockets, you can purchase one of the many anti-static brushes available at the Apple Store.
If you are sick, hardworking and kind, you can also use a fresh toothpick, because like a soft new toothbrush this is also non-conductive and with its prongs can easily pick up dust from the port. To use a toothpick, lightly moisten the tip and clean the top and bottom of the port with cleaning alcohol. You will notice that the dirt sticks to the tip of the toothpick and the ports get clean.
2. Check the lightning protection cable
If your iPhone still doesn't make it clean after charging, check for damage to the load-shedding cable. Have it frayed at the ends? If so, the cable must be replaced.
If the cable damage is not visible , how can you be sure that this is the culprit that is preventing your iPhone from charging properly?
If your iPhone is not charged using a wall adapter, then plug in your computer's USB to charge your iPhone. If your computer is charging, then sure if the cable is faulty . Another easy way is to use your friend or family member's cable. If your iPhone starts charging with their cable, it just means your cable is damaged and needs to be replaced. If your iPhone is under warranty, the cable can be replaced for free .
Tip : Avoid choosing cheap third-party non-Apple cables. However, that doesn't mean all non-Apple cables are inferior. You need to explore, easily in your pocket, is the highest quality cable.
3. Check the iPhone/iPad charger
We all know that you can charge your iPhone in different ways and means - your laptop, car charger, speaker dock, and other backup power sources. As mentioned in the previous article, the software decides to charge the iPhone or not when connected to any accessories. Remember, if the software detects fluctuations in power , your iPhone won't charge as a safeguard. So wait until the power supply is OK and try to charge it.
How do you decide if the iPhone charger is faulty? The same rules apply to the charger that you use to check if the cable is faulty or not. Try some other charger; if your iPhone starts charging, you'll need to replace the charger.
Try charging your iPhone with a wall adapter, if that fails try a USB port on your computer, if that also fails, then try with a different charger. If your iPhone doesn't charge with an adapter, but charges fine with your friend's adapter, it's the right time to get yourself a new charger. Always choose an original Apple charger that you use for your iPhone or a high-quality charger that almost meets Apple's charger specifications.
Tip : If you're using an Apple keyboard or a USB hub, we recommend plugging your iPhone into a computer's USB port. USB hubs and keyboards are plugged into all devices to share power, so the iPhone may not be able to charge due to lack of sufficient power.
4. Repair on your iPhone
Are you sure your iPhone is water damaged ? If you are unsure of the internal damage, your best bet is to visit an authorized Apple store and have it repaired or replaced.
5. Hard reset your iPhone
Hard reset your iPhone, it might work and your iPhone can start charging. In order to hard reset iPhone 7 or later just press and hold the power and volume keys together. If you're using an older version of the iPhone press the Power and Home buttons together until you see the Apple logo, then let go of the Off button.
6. Use DFU mode
If the above solutions fail, you can make a final attempt and recovery in DFU mode . DFU stands for Device Firmware Update. It is different from recovery mode. If you're going to choose this method, proceed with the utmost caution because there is a chance that something will go wrong. When you DFU restore, your computer removes and reloads all the control software and code on your iPhone hardware, so be careful before you jump into DFU!
Note : If you experience charging problems with your iPad, you can use the solutions mentioned above. They function on the same iPad.